ZKG series vacuum band filter

Belt type vacuumfilter take filters the cloth as the filter medium, is fully realizes the liquid-solid separation highly effective splitter using the material gravity and the vacuum suction. Uses the whole the ring-like rubbered tape to take the vacuum chamber. The ring-like adhesive tape by the electrical machinery dragging continuous running. Filters the cloth shop to spread on the adhesive tape with it synchronization movement, the adhesive tape and on the vacuum sliding table the ring-like friction tape contacts and forms the water seal. The ground paste in filters on evenly the cloth by the stock distributing gear cloth. When vacuum chamber connection vacuum system, the vacuum production pulls out on the adhesive tape filters the area, the filtrate passes through filters the horizontal trench which the cloth silk glue to take to bring with to compile and enters the vacuum chamber by the eyelet, a solid material is temporarily stopped in filters on the cloth to form filters the cake. Enters the vacuum chamber the liquid to discharge after the steam separator, along with the rubbered tape migration, has formed filters the cake to enter in turn filters the cake washing section and wipes out the area, the most after-filtration cloth and the adhesive tape separate, will filter the cake in the ex-denning roller place to dump. The dismantle filters the cake filters the cloth after the clean obtains the regeneration, passes through after again group of support rolls and correct an error the installment, enters the filtration area, starts to enter the new filtration time.